RO-C SERIE OSMOSIS

The RO-C series osmosis systems are medium and high production equipment for low salinity water designed for use in purification applications, service water and especially for industrial processes.

The RO-C series osmosis systems output ranges from 8.000 L/h to 28.000 L/h. For higher flow rates, please consult.

Main components:

• 5 microns microfiltration.
• Minimum pressure switch.
• Maximum pressure switch.
• High pressure vertical centrifugal pump in 316 stainless steel.
• 8” reverse osmosis membrane depending on the selected model.
• Pneumatic automatic butterfly valve type wafer at the entrance.
• 316 Stainless Steel Pneumatic Automatic Flushing Ball Valve.
• Inlet microfiltration pressure gauge.
• Outlet microfiltration pressure gauge.
• Pump pressure gauge.
• Interstage pressure gauge.
• Rejection pressure gauge.
• Backpressure pressure gauge.
• Permeate flow meter.
• Rejection Flow meter.
• Recirculation flow meter (depending on the model).
• Conductivity meter in the permeate line.
• Rejection flow key regulator.
• Recirculation flow key regulator (depending on the model).
• PLC HW programmable controller.
• Flushing / CIP tank.
• Protected carbon steel structure.

Versions:

• ST : with soft starter for high pressure pump control.
• ST+ : with speed variator for control high pressure pump.
• LS:
  • with speed variator for control high pressure pump
  • digital flow meter
•  LX :
  • with speed variator for control high pressure pump
  • digital flow meter
  • pressure transmitters
  • GRUNDFOSS bomb
  • PLC SIEMENS

Options:

• Mixing system.
• Raw water conductivity meter.
• Raw water Redox potential meter.
• Raw water pH meter.
• SIEMENS PLC for ST, ST+ and LS versions.
• GRUNDFOSS pump in ST, ST+ and LS versions.
• 304 stainless steel structure

Requirements:

• Power supply: 380-400 VAC-50 Hz.
• Supply pressure: 3-5 bars.
• Working temperature: 10-35 °C.
• TDS maximum input: 2.000 ppm.
• The equipment requires compressed air supply for its operation.