RO-SW4 SERIES OSMOSIS

RO-SW4 reverse osmosis systems are highly efficient for the desalination of seawater, guaranteeing a final product with a salinity of less than 500 ppm, making it suitable for many uses.

These units are manufactured with high quality components and materials, ensuring durability and easy maintenance, which prolongs their useful life.

Furthermore, the production capacity of these systems is quite flexible, varying from 220 liters per hour to 1200 liters per hour, thus adapting to various desalinated water supply needs.

Main components:

• 1 micron microfiltration.
• Motorized PVC inlet valve.
• Minimum pressure switch.
• Maximum pressure switch.
• CAT high pressure pump.
• Permeate and rejection flowmeter.
• Regulating valve in 316 stainless steel.
• Pressure gauges in 316 stainless steel (Microfiltration inlet, microfiltration outlet, pump pressure and rejection pressure).
• Motorized drag valve in 316 stainless steel.
• 1000 psi End-port PRFV membrane holders.
• High salt rejection seawater membranes.
• Electrical panel with PLC HW.
• Permeate conductivity meter.
• Structure in 304 stainless steel.
• Low pressure collectors made of PVC PN16.
• High pressure manifolds built with high pressure hoses and superduplex stainless steel.

Options:

• Flushing system.
• Conductivity meter for raw water.
• Raw water redox meter.
• Raw water pH meter.

Requirements:

• TDS water supply: ≤ 36.000 mg/l.
• Design temperature: 18ºC.
• Working pressure: 49 – 60 bars.
• Inlet pressure: 3-4 bar.
• Salt rejection: 98 – 99 %.
• Working temperature: 10 – 30 ºC.
• Power supply: 380 – 400 VAC – 50 Hz